156
Troubleshooting
Display
Why did my screen go blank?
❑
Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If
the computer is in LCD (Video)
Sleep mode, press any key to bring the computer back into Normal mode. See
Using the
Power Saving Modes
for more information.
❑
Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.
❑
If your computer is using battery power, make sure the battery pack is installed properly and is charged. See
Using the
for more information.
❑
If the display output is directed to the external display, press the
Fn
+
F7
keys. See
Combinations and Functions with
the Fn Key
for more information.
What should I do if I do not see proper images or videos?
❑
Be sure to select
Highest (32 bit)
for the display colors before using video/image software or starting DVD playback.
Selecting any other option may prevent such software from displaying images successfully. To change the display colors,
follow these steps:
1
Right-click on the desktop and select
Personalize
.
2
Click
Display Settings
.
3
Select
Highest (32 bit)
under
Colors
.
❑
Do not change the display resolution or colors while using video/image software or playing DVDs, as it may cause
unsuccessful playback/display or unstable system operations.
Additionally, it is recommended you disable your screen saver before starting DVD playback. If the screen saver is
enabled, it may be activated during DVD playback and prevent it from running successfully. Some screen savers have
been found to even change the display resolution and colors.