Sony Vaio VGN-AR31E Скачать руководство пользователя

Страница: 66 / 212

Using Your VAIO Computer

Removing an ExpressCard Module

Follow the steps below to remove the ExpressCard module while your computer is on. If it is not removed properly, your
system may not work properly.

Before removing an ExpressCard module

If your computer is on, be sure to follow these steps to prepare for removing the module safely.

Double-click the Safely Remove Hardware icon on the taskbar.
The Safely Remove Hardware window appears.

Select the hardware you want to unplug.

Click Stop.
The Stop a Hardware device window appears.

Confirm that the device can be safely removed from the system.

Click OK.
A message appears stating it is now safe to remove the device.

Click OK.

Click Close to close the Safely Remove Hardware window.

If your computer is off, proceed with the following:

To remove an ExpressCard module on VGN-FE series models

Push in the ExpressCard module toward the computer to pop it out.

Gently take hold of the ExpressCard module and pull it out of the slot.

Содержание Vaio VGN-AR31E





















































































































































































































Результаты поиска

Содержание Vaio VGN-AR31E

Отзывы:

Похожие инструкции для Vaio VGN-AR31E

Бренды по названию

Популярные бренды

Sony Vaio VGN-AR31E, Руководство пользователя

Результаты поиска

Содержание Vaio VGN-AR31E

Отзывы:

Похожие инструкции для Vaio VGN-AR31E

Бренды по названию

Популярные бренды