2-12
Confidential
PCV-RX7_ _Series (UC)
• CPU INSTALLATION
2-20. CPU
A
4
Elect the lever
in the direction of arrow
A
.
3
DC fan
(with heat sink)
2
clip
2
clip
5
CPU
1
harness
Note : When heat sink is removed from CPU,
install new ones after thermal diffusion
grease is wiped off and silicon compound
is applied to the place shown in the figure.
Thermal diffusion grease : silicon compound (G-765) 90G
Amount to apply
: 0.1 g (as the same size as the tip of a match) (Celeron)
0.5 g (as the same size as the tip of a match) (Pentium 4)
grease
(in the surface at the
splatter)
grease
(in the surface at the
splatter)
*
Take care not to apply the grease
to any other places because it has
high conductivity.
(Celeron)
(Pentium 4)
