26
Using your VAIO computer
Hardware Guide
Before using the mouse
Before attempting to use the wireless mouse, you must enable communication between the computer and the mouse.
Two AA batteries, specific for use in the
wireless mouse, are supplied with your VAIO.
To connect the wireless mouse, proceed as
follows:
1
Turn the wireless mouse over and slide
the power button to the
OFF
position (1).
2
Insert the two specific AA batteries into
the wireless mouse as shown (2).
3
Make sure the wireless receiver is
connected to a USB connector (3) on the
main unit.
4
Turn on the computer.
5
Turn the wireless mouse over and slide
the power button to the
ON
position (4).
6
Press the
CONNECT
button on the
wireless receiver (5).
7
Press the
CONNECT
button on the
underside of the mouse (6).
Press this button within 50 cm of the receiver.
Communication between the wireless mouse and the computer is now active.
