Sony VAIO PCG-QR10, Руководство пользователя

Страница: 47 / 80

Sony Not
e
book Us
er
G
u
id
e
Connecting peripheral devices
47
n N
Inserting a diskette
To insert a disk, proceed as follows:
1 Hold the diskette with the label side facing up.
2 Gently push the diskette into the drive until it clicks into place.
Removing a diskette
To remove a diskette, proceed as follows:
When you finish using the diskette, wait until the LED indicator turns off and then press the Eject button to
remove the diskette.
Before pressing the Eject button, make sure that the LED indicator is turned off.
If the diskette does not come out by pressing the Eject button, disconnect the floppy disk drive from the computer.
!
Do not press the Eject button while the LED indicator is on. It may damage the diskette.
Removing the floppy disk drive
To remove the floppy disk drive, proceed as follows:
If your computer is on, wait until the LED indicator turns off and then unplug the USB cable from the
computer. If the floppy disk drive is not removed properly, your system may crash and you may lose data
that you did not save before.
If your computer is off, you can directly unplug the USB cable from the computer.
To carry your floppy disk drive when you have finished using it, fold the floppy disk cable into the compartment on the side of the floppy disk drive.