1-10
Confidential
PCG-F610/F630 (UC)
1-4.Replacing the CPU
1. Removing the CPU
2. Installing the CPU
2
2
3
1
1
2
3
3
1
Insert all pins of the replacement CPU into
the holes of the base and push the CPU in the
direction of the arrow.
2
Insert a screwdriver tip into the groove as shown
and slant it in the direction of the arrow.
3
The base under the CPU moves slightly in the
direction of the arrow and the CPU is locked.
Attach the CPU while
aligning the cut-out with
this position.
1
Insert a screwdriver tip into the groove as shown and slant it in the direction of the arrow.
NOTE:
Do not use screwdrivers having a large tip than the width of the groove.
Otherwise, it may cause the groove to be damaged.
2
The base under the CPU moves slightly in the direction of the arrow and the lock is released.
3
The CPU can be removed upward.
NOTE:
The DIP switch on the MBX-39 board (main board) is set to match with the CPU (8-759-697-16) that is used in
this computer.
(The upper position where ON indication is shown is the ON position . The lower position is the OFF position.)
1 2 3 4 5 6 7 8
O N
