Sony Vaio PCG-C1F, Руководство пользователя

Страница: 52 / 68

Getting Help
55
I cannot record using Smart Capture, Smart Write, or Smart Label
1
Double-click in the task tray.
2
Select Properties from the Option menu.
3
Uncheck “Mute” (Fn + F3) if it is checked.
Smart Write and Smart Label do not start
Reinstall the software from the Product Recovery CD-ROM, and execute
the following: G:VAIO/Sony Shared Library/setup.exe
About CD-ROMs and diskettes
I cannot play a CD-ROM disc
❑ Make sure that the switch of the CD-ROM drive is turned on and that
the AC adapter is connected securely.
❑ The AC adapter’s protection mechanism may be activated. Unplug
the AC adapter from the wall outlet and reconnect it after 2 or 3
minutes.
❑ Make sure the label of the CD-ROM is facing up.
❑ If the CD-ROM disc requires software, make sure the software is
installed according to the program’s instructions.
❑ Moisture condensation may have occurred. Disconnect the CD-ROM
drive and disconnect the power to the drive for at least one hour.
❑
Make sure the CD-ROM drive is properly connected. See “CD-ROM
Drive” on page 42.
❏ Make sure the computer is turned on.
The CD-ROM drive is not detected by the computer or does not run normally.
❑ Check that the PC card you connect is the one supplied for using with
your CD-ROM drive.
❑ Make sure the interface cable is connected to the PC card properly.
❑ Make sure the PC card is seated securely in the PC card slot in the
computer.
❑ Check the PC card slot for bent or broken pins.
❑ The power of the CD-ROM drive is OFF.
❑ A pickup cover is installed in your drive. Remove the pickup cover
before inserting a disc.
✍
All the advice mentioned in this chapter is valid for the PCGA-CD5 CD-ROM drive.
For other models, refer to your CD-ROM drive manual.