Sony UWP-X5, Руководство по эксплуатации

Страница: 23 / 28

23 Troubleshooting
* Body-pack transmitter (UTX-B1) only
There is
distortion in
the sound. The attenuation level of the
transmitter is too low. The input level of the tuner is
extremely high. Press the – button
on the transmitter in attenuation
level setting mode to raise the
attenuation level.
The transmitter and the tuner are
set to different channels. Set the transmitter to the same
channel.
There is
sound
interruption
or noise. The RF indications on the tuner
appear (the RF indicator lights
up) even when the transmitter is
off. Jamming radio waves are being
received. Determine which
channels are usable (i.e., channels
for which the RF indications on the
tuner do not appear (or for which
the RF indicator on the tuner does
not light up)) and set the tuner and
transmitter to the same usable
channel. When two or more
transmitters are used
simultaneously, use another
channel group that is unaffected by
jamming radio waves.
The transmitter and the tuner are
set to different channels. Set the transmitter to the same
channel as the tuner.
Two or more transmitters are set
to the same channel. Set each transmitter to a different
channel.
The transmitters are not set to the
channels within the
same channel group. The channel plan which the UWP-
X5 components use is set so that
no signal interference occurs when
2 or more transmitters are used
simultaneously. Set each
transmitter to a different channel
within the same channel group.
Symptom Meanings Remedy