Sony UPX-C100 Скачать руководство пользователя

Страница: 69 / 77

Troubleshooting

Camera LCD

Playback

Printing

Picture Quality

Symptom

Cause/Solution

If the camera is
used in a cold
location, residual
images may
appear on the
LCD.
Black spots may
appear or red,
blue, green, or
other color spots
may remain on the
LCD.

• This is a normal phenomenon associated

with LCDs.

This is not a malfunction.

A printer icon
appears in the
center of the LCD,
and the camera
does not operate.

• The printer is printing a picture.

Wait until printing finishes and
perform the operation again.

The display image
freezes for a while
after data
transmission ends.

• Paper is being fed to the printer.

The display image will change when
the paper finishes feeding and printing
begins.

Symptom

Cause/Solution

The DELETE
screen does not
appear, even if the

/ button is

pressed.

• The PICTURE INFO screen is displayed

in Playback mode.

Press the MENU/GO BACK button to
return to the MENU screen for
Playback mode.

The display does
not zoom in, even
if the zoom lever
is pressed toward

Symptom

Cause/Solution

Pictures do not
print, even if the

button is

pressed.

• The camera is set to Capture mode.

Pictures can only be printed from
auto-review display or Playback
mode.

• The PICTURE INFO screen is displayed

in Playback mode.

Press the MENU/GO BACK button to
return to the MENU screen for
Playback mode.

Symptom

Cause/Solution

The picture is blurred.

• The picture is out of focus.

Check the distance between the
lens and the subject, and make
sure the subject is within the
focus range.

• The camera was moved when the

release button was pressed.

Hold the camera correctly and
press the release button slowly.

• The shutter speed was too slow

because EXPOSURE & FLASH is
set to

Set the appropriate shooting
conditions. (See “Setting the
Shooting Conditions” on page 38)

• The lens is dirty.

Clean the lens with a clean, soft,
dry cloth.

The picture is too dark. • Something (such as a finger) was

blocking the flash.

Hold the camera correctly and
make sure nothing is blocking the
flash.

• The subject was too far away.

Make sure the subject is within
flash range when taking the
picture.

Compensate the exposure.

• The subject was backlit.

Use the flash.

The colors in a picture
taken indoors are not
correct.

• The lighting is affecting the colors.

Set the white balance correctly.
(See “Adjusting the White
Balance (WHITE BALANCE)”
on page 44)

Part of the picture is
missing.

• Something (such as a finger) was

blocking the lens.

Hold the camera correctly and
make sure nothing is blocking the
lens.

The area around the
subject is dark.

• The built-in flash was used with

FULL/HIGH/STD.

Take the picture with HIGH-ID/
STD-ID.

Содержание UPX-C100














































































Результаты поиска

Содержание UPX-C100

Отзывы:

Похожие инструкции для UPX-C100

Бренды по названию

Популярные бренды

Sony UPX-C100, Руководство по эксплуатации

Результаты поиска

Содержание UPX-C100

Отзывы:

Похожие инструкции для UPX-C100

Бренды по названию

Популярные бренды