Sony UP25MD, Инструкция по эксплуатации

Страница: 66 / 76

66
Ink Ribbon and Paper
Mis
c
e
llane
ous
Ink Ribbon and Paper
Do not re-use
Doing so may result in malfunction and negatively
affect printing results.
Color Printing Pack UPC-21S
Contains color ink ribbons and paper for 240 sheets worth
of high-speed, high-sensitivity printing, including:
3 ink ribbons for 80 sheets worth of printing each
3 reams of paper (90
×
100 mm) with 80 sheets each
Color Printing Pack UPC-21L
Contains color ink ribbons and paper for 200 sheets worth
of high-speed, high-sensitivity printing, including:
4 ink ribbons for 50 sheets worth of printing each
4 reams of paper (100
×
144 mm) with 50 sheets each
Laminate Color Printing Pack UPC-24SA
Contains color ink ribbons and paper for 180 sheets worth
of laminate printing, including:
3 ink ribbons for 60 sheets worth of printing each
3 reams of paper (90
×
100 mm) with 60 sheets each
Laminate Color Printing Pack UPC-24LA
Contains color ink ribbons and paper for 160 sheets worth
of laminate printing, including:
4 ink ribbons for 40 sheets worth of printing each
4 reams of paper (100
×
144 mm) with 40 sheets each
About the Color Printing Pack
(UPC-21S/UPC-21L) and Laminate
Color Printing Pack (UPC-24SA/
UPC-24LA)
Notes
• When the paper runs out, replace both the paper and the
ink ribbon.
• Use the ink ribbon and the paper in the carton as a set.
Do not mix with other varieties of ink ribbon or paper.
• Since like other color dyes, the dyes used in this ink
ribbon may discolor in time, the product will neither be
replaced nor is a warranty against any color change
given.
Storing paper
• Avoid storing paper in a location subject to high
temperatures and humidity, excessive dust, or direct
sunlight.
• Remove the partially used paper and ink ribbon from the
printer, reseal them in their original bags, and store them
in a cool, dark location. Before unsealing and reusing the
stored paper and ink ribbon, allow them to return to room
temperature to prevent water condensation.
Notes for preserving your printouts
• Keep printouts in a dark and cool place.
• Be sure not to stick plastic tape onto the printout. Also
avoid leaving a plastic eraser on top of the printout or
putting the printout between objects which contain
plasticizer (a desk mat, etc.)
• Be sure not to pour any alcohol or other volatile organic
solvents onto the printouts.