Sony UHP-H1, Руководство по эксплуатации, Страница: 39 / 73

39
UHP-H1
4-588-105- 11 (1)
master page=right E:\SONY
DVD\SD150032\4588105111_US\070ADD.fm
Additional Information
Bluetooth connection cannot be done/
completed.
,
Set [Bluetooth Mode] to [On]
(page 30).
,
Make sure the Bluetooth device to be
connected is turned on and the
Bluetooth function is enabled.
,
Move the Bluetooth device closer to
the player.
,
Connect this player and the Bluetooth
device again. You may need to cancel
the connection with this player using
your Bluetooth device first.
,
Delete pairing information once from
the device list and connected device,
before retrying connection.
,
Connection may not be possible if
other Bluetooth devices are present
around the player. In this case, turn off
the other Bluetooth devices.
,
The connection registration
information has been erased. Perform
the connection operation again.
There is no sound, the sound skips or
fluctuates, or the connection is lost.
, DVD AUDIO cannot be played via
Bluetooth device due to DRM.
, Move the Bluetooth device closer to
the player.
,
Make sure the player is not receiving
any interference from a Wi-Fi
network, other Bluetooth device, other
2.4 GHz wireless device, or
microwave oven.
, Check that the Bluetooth connection is
properly made between this player and
the Bluetooth device.
,
Connect this player and the Bluetooth
device again.
,
Keep the player away from metal
objects or surfaces.
The [Control for HDMI] function does
not work (BRAVIA Sync).
,
Check that your TV is connected via
the HDMI OUT 1 jack. If your TV is
connected via the HDMI OUT 2 jack,
BRAVIA Sync is disabled.
,
Check that [Control for HDMI] in
[HDMI Settings] is set to [On]
(page 33).
, If you change the HDMI connection,
turn the player off and on again.
,
If power failure occurs, set [Control
for HDMI] in [HDMI Settings] to
[Off], then set [Control for HDMI] in
[HDMI Settings] to [On] (page 33).
,
Check the following and refer to the
instruction manual supplied with the
component.
– the connected component is
compatible with the [Control for
HDMI] function.
– the connected component’s setting
for the [Control for HDMI] function
is correct.
,
When you connect the player to a TV
through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for
HDMI] function, you may be unable
to control the TV from the player.
– if you change the HDMI
connection, disconnect and
reconnect the AC power cord, or a
power failure occurs, try the
following:
1
Switch the input
selector of the AV amplifier
(receiver) so that the picture from
the player appears on the TV screen.
2
Set [Control for HDMI] in
[HDMI Settings] to [Off], then set
[Control for HDMI] in [HDMI
Bluetooth connection Control for HDMI (BRAVIA
Sync)