http://cxema.ru
– 2 –
KV-XA29M31/XA29M50/
XA29M61/XA34M31
RM-954
SPECIFICATIONS
Note
Power requirements
220-240 V AC, 50/60 Hz
Power consumption (W)
Indicated on the rear of the TV
Television system
B/G, I, D/K, M
Color system
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58
Except KV-XA29M50
Stereo/Bilingual system
NICAM Stereo / Bilingual B/G, I; A2 Stereo Bilingual (German) B/G
Except KV-XA29M50
Telerext Language
English, Arabic, French
Except KV-XA29M50
Channel coverage
B/G
VHF: E2 to E12 / UHF: E21 to E69 / CATV: S01 to S03, S1 to S41
I
UHF: B21 to B68 / CATV: S01 to S03, S1 to S41
D/K
VHF: C1 to C12, R1 to R12 / UHF: C13 to C57, R21 to R60
CATV: S01 to S03, S1 to S41, Z1 to Z39
M
VHF: A2 to A13 / UHF: A14 to A79 /
CATV: A-8 to A-2, A to W+4, W+6 to W+84
˘
(Antenna)
75-ohm external terminal
Audio output (Speaker)
8W + 8W
10% distortion
Number of terminal
D
(Video)
Input: 4*
Output: 1
Phono jacks; 1 V
P-P
, 75 ohms * Three input lines available
≥
(Audio)
Input: 4*
Output: 1
Phono jacks; 500 mVrms
* Three input lines available
(S Video)
Input: 2
Y : 1 Vp-p, 75 ohms,
unbalanced, sync
negative
C :0.286 Vp-p, 75 ohms
(Component Video)
Input: 1
Phono jacks
Y : 1 Vp-p, 75 ohms,
sync negative
C
B
: 0.7 Vp-p, 75 ohms
C
R
: 0.7 Vp-p, 75 ohms
Audio : 500 mVrms
2
(Headphones)
Output: 1
minijack
Picture tube
29 inch
Except KV-XA34M61
34 inch
KV-XA34M61
Tube size (cm)
72
Measured diagonally
Except KV-XA34M61
86
Measured diagonally
KV-XA34M61
Screen size (cm)
68
Measured diagonally
Except KV-XA34M61
80
Measured diagonally
KV-XA34M61
Dimension (w/h/d, mm)
722 x 576 x 516
Except KV-XA34M61
895 x 674 x 590
KV-XA34M61
Mass (kg)
51
Except KV-XA34M61
78
KV-XA34M61
Design and specifications are subject to change without notice.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK
!
ON
THE SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN
SUPPLEMENTS PUBLISHED BY SONY.
CAUTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND
THE ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR
CARBON PAINTED ON THE CRT, AFTER REMOVING THE
ANODE.