Using Your New TV
5
Using Y
our New TV
Sony KV-XA21 Group N7 (GB-Dummy)_4-080-391-E4 (1)
Front of TV
Notes
• With the “VIDEO MULTI SYSTEM” input terminal, you can also receive
PAL, NTSC and SECAM video signals when using VIDEO IN 1 jacks at
the rear of your TV or the VIDEO 2 INPUT at the front of your TV.
• If you connect a monaural VCR, connect the yellow plug to VIDEO (the
yellow jack) and the black plug to AUDIO-L (MONO) (the white jack).
• When no signal is input to the connected video equipment, the TV screen
becomes blue.
CAUTION
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
Insert the batteries
into the remote
Step 3
Preset the channels automatically
Tips
• If you want to stop automatic channel presetting, press SELECT.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 9).
• The AUTO PROGRAM button on the remote works as the AUTO
PROGR button on the TV.
AUTO
PROGR
1
1
2
3
1
2
3
CABLE: ON
AUTO PROGRAM
SLEEP
CABLE
AUTO
PROGRAM
ADD/
ERASE
PIC MODE
POWER
CHANNEL
POWER
STANDBY/
STEREO/
WAKE UP
SELECT
VIDEO INPUT
VOLUME
AUTO
PROGR
R
VIDEO 2 INPUT
VIDEO L (MONO)
AUDIO
Step 2
Note
• Do not use old batteries nor use different types of batteries together.
01GB03GETTWN.p65
18/03/04, 09:25
5
Black
