– 14 –
KV-HS29M61/M90/M91, HS34M61/M90/M91, HS38M61/M90/M91
RM-997
•
REMOVAL OF ANODE-CAP
NOTE : After removing the anode, short circuit the anode of
the picture tube and the anode cap to the metal chas-
sis, CRT shield or carbon paint on the CRT.
•
REMOVING PROCEDURES
1
Do not damage the surface of anode-caps with sharp
shaped objects.
2
Do not press the rubber too hard so as not to damage the
inside of anode-cap.
A metal fitting called the shatter-hook terminal is built
into the rubber.
3
Do not turn the foot of rubber over too hard.
The shatter-hook terminal will stick out or damage the
rubber.
•
HOW TO HANDLE AN ANODE-CAP
b
c
a
a
1
Tern up one side of the rubber cap in the direction indicated
by the arrow
a
.
2
Using a thumb pull the rubber cap firmly in the direction
indicatid by the arrow
b
.
3
When one side of the rubber cap is separated from the
anode button, the anode-cap can be removed by terning up
the rubber capand pulling it up in the directin off the arrow
c
.
Anode button