4
Using Your New TV
Using Your New TV
: Signal flow
or
Antenna cable (not supplied)
Antenna cable (not supplied)
Rear of TV
To video and
audio outputs
To S video
output
Audio/Video cable
(not supplied)
: Signal flow
To
S VIDEO input
VCR
Antenna cable (not supplied)
To antenna
output
To
˘
(antenna)
Rear of TV
VIDEO (yellow)
AUDIO-L (MONO) (white)
AUDIO-R (red)
To VIDEO IN
1, 2, or 3
Getting Started
Step 1
Connect the antenna
If you wish to connect a VCR, see the
Connecting a VCR
diagram below.
Connecting a VCR
To watch the video input, press VIDEO (see page 11).
CAUTION
• Do not plug in the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
F connector
(not supplied)
S video cable
(not supplied)
R
L
Y
C
B
C
R
COMPONENT VIDEO(DVD) IN
AUDIO
VIDEO
VIDEO
IN
MONITOR
OUT
1
S VIDEO
2
3
VIDEO
VIDEO IN
VIDEO OUT
AUDIO
R L
Antenna
adapter
(supplied)
Antenna
adapter
(supplied)