–
22
–
KV
-ES38M31/ES38M61/ES38M90/ES38M91
RM-916
32
Adjusting Your Setup (MENU)
Adjusting the “ADJUST” options under “PICTURE MODE”
1
Move
up or down to
select the desired item
(e.g., “COLOR”), then
press
.
2
Adjust the value according to the following table, then press
.
* You can adjust “HUE” for the NTSC color system only.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Adjusting the “ADJUST” options under “SOUND MODE”
1
Move
up or down to
select the desired item
(e.g., “BALANCE”), then
press
.
2
Adjust the value according to the following table, then press
.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
COLOR
0
8
BALANCE
00
For
“PICTURE”
“COLOR”
“BRIGHT”
“HUE”*
“SHARP”
Move
down or left to
decrease picture contrast
decrease color intensity
darken the picture
increase red picture tones
soften the picture
Move
up or right to
increase picture contrast
increase color intensity
brighten the picture
increase green picture tones
sharpen the picture
For
“BASS”
“TREBLE”
“BALANCE”
“BBE”
Move
down or left to
Move
up or right to
decrease the bass.
increase the bass.
decrease the treble.
increase the treble.
increase the left speaker’s
increase the right speaker’s volume.
volume.
Move
up or down to:
select “HIGH” for higher enhancement of sound clarity;
select “LOW” for lower enhancement of sound clarity;
select “OFF” to turn off the BBE sound.
b
b
b
b
Changing the “A/V CONTROL” setting (continued)
33
Adjusting Your Setup (MENU)
To
receive digital audio signal through
DIGITAL IN (component
video input) jack.
receive analog audio signal through
L and R (component
video input) jack.
Select
“ON“
“OFF”
Setting the “DIGITAL IN” options
1
In the “DIGITAL IN”
menu, move
up or
down to select the
desired option (see table
below).
2
Press
to confirm the
selected option.
Note
• Your TV can only receive Dolby Digital or Linear PCM format digital
signals through the
DIGITAL IN (component video input) jack
(see page 7). Receiving any other format digital signal may cause
unwanted noise or no sound from the speakers.
Tip
• For details on the menu system and how to use the menu, refer to
Introducing the menu system
on page 28.
b
A / V CONTROL
ON
PICTURE MODE
DRC-MF : DRC
OFF
SOUND MODE
SURROUND : O
DIGITAL IN
