– 17 –
KV-DX29K9H/KV-DX29K9H/B/DX29K90B/DX29K90L
RM-1006
RM-1006
RM-1006
RM-1006
3. The SCREEN displays the item being adjusted.
4. Press
1
or
4
on the Remote Commander to select the
adjustment item.
5. Press
3
or
6
on the Remote Commander to change the data.
6. Press
2
or
5
on the Remote Commander to select the
category.
Every time you press 2(Category up), Service mode changes
in the order as shown below.
3-3.
MEMORY WRITE CONFIRMATION METHOD
1. After adjustment, turn power off with the remote commander.
2. Turn power on and set to Service Mode.
3. Call the adjusted items again and confirm they were adjusted.
3-1.
METHOD OF SETTING THE SERVICE ADJUSTMENT
MODE
SERVICE MODE PROCEDURE
1. Standby mode. (Power off)
2.
n
5
n
(+)
n
on the Remote Commander.
(Press each button within a second.)
3-2.
SERVICE MODE ADJUSTMENT
3-4. ADJUSTING BUTTONS AND INDICATOR
7. If you want to recover the latest values press
0
then
to
read the memory.
8. Press
[MUTING]
then
to write into memory.
9. Turn power off.
Note: Press
8
then
on the Remote Commander to initialize
or turn set off and on to exit.
RM-1006
Adjustment item up
Category up
Data up
Data down
Category down
Data
FH: - - - - - /
FV: - - - - -
0
0
0
3D-COMB
0 NRMD
Item NO.(register name)
Category
0
0
0
- - -
3D-COMB
2103-1
2150P-1
2150P-2
2150P-3
2150D-1
2150D-3
2151
2026
AUTO-WIDE
AP
D-CONV
TP
OP
MIDXE2
2150D-2
2150P-4
MIDXE1
SNNR
GR
MIDXE3
OSD
Adjustment item down
SECTION 3
SERVICE MODE
(+)
