32
Additional Information
Sony KV-DR34M89 Group M3 (
GB
)_4-088-297-16 (1)
Connecting a DVD player to the component video input
terminal (
)
1 Using an audio cable, connect R and L under
(component video input) on your
TV to the LINE OUT, AUDIO R and L output connectors on your DVD player.
2 Using a component video cable, connect Y, P
B
/C
B
, and P
R
/C
R
under
(component video input) on your TV to the COMPONENT VIDEO OUT Y, C
B
,
and C
R
output connectors on your DVD player.
3 Press DVD on the remote to watch the
(component video input) and “DVD”
will appear on your screen.
Notes
• Some DVD player terminals may be labeled differently:
• When both
(S video) and
(video) for
t
1 or
t
4 are connected at the same time,
(S video) is automatically selected. To view
(video), disconnect the S video cable.
• If you select “DVD” on your TV screen, the signal from the
T
(monitor output) will not be
output properly. This does not indicate a malfuncion.
• When receiving a progressive signal through the
(component video input), “PIP” is not
available, and “DRC-MF”, “3D-NR” and “GAME MODE” are not selectable.
DVD player
TV rear panel
Component video cable (not supplied)
Audio cable (not supplied)
Connect
To (on the DVD player)
Y (green)
Y
P
B
/C
B
(blue)
C
B
, P
B
, C
b
or B-Y
P
R
/C
R
(red)
C
R
, P
R
, C
r
or R-Y
VIDEO
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
C
B
C
R
R
L
Y
P
B
/C
B
P
R
/C
R
continued
01GB08ADV-MIX.p65
28/7/03, 12:20 PM
32