– 11 –
KV
-2199XDK
RM-952
9
Using Your New TV
Using Y
our New TV
1
Press SELECT until
“MANUAL PROGRAM”
appears.
2
Press + or –.
3
Press PROGR +/– or the
number buttons until the
desired program number
appears.
4
Press + or – until the
desired channel picture
appears.
5
Press SELECT.
To change the TV system setting
If the picture or sound is abnormal when receiving programs through the
˘
(antenna)
terminal.
(1) Press SELECT until “TV SYS” appears.
(2) Press + or – to select the appropriate TV system until the picture or sound quality
is optimal.
SELECT
1
Presetting channels manually
1
2
3
4
5
6
7
8
0
-/--
9
PROGR
or
continued
B/G
D/K
TV SYS: B/G
MANUAL PROGRAM
SELECT
VHF LOW B/G
10
Using Your New TV
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
COL SYS : AUTO
To change the color system setting
If the color is abnormal when receiving programs through the
˘
(antenna) terminal or the
…
(video input) jack
(1) Press SELECT until “COL SYS” appears.
(2) Press + or – to select the appropriate color system until the color is optimal.
Tip
• Normally set “COL SYS” to “AUTO”.
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
2
Press SELECT until “MANUAL PROGRAM” appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
Presetting channels (continued)
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and
¸
+/– on the TV to preset channels and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help to reduce the following problems: double
images and lines moving across the TV screen.
You can use the fine tuning function as below:
(1)
Select the program number you want to adjust.
(2)
Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3)
Press + or – on the remote control once.
(4)
Press
to display “FINE” on the screen.
(5)
Press + or – continuously until the above problems are minimized.
The + or – icon on the screen flashes while tuning.
(6)
Press SELECT to return to normal screen.
