CPD-200GS
2-2
3
When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling up it in the
direction of the arrow
c
.
• HOW TO HANDLE AN ANODE-CAP
1
Don’t hurt the surface of anode-caps with shartp shaped material!
2
Don’t press the rubber hardly not to hurt inside of anode-caps!
A material fitting called as shatter-hook terminal is built in the
rubber.
3
Don’t turn the foot of rubber over hardly!
The shatter-hook terminal will stick out or hurt the rubber.
• REMOVAL OF ANODE-CAP
NOTE: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT, after
removing the anode.
• REMOVING PROCEDURES
1
Turn up one side of the rubber cap in
the direction indicated by the arrow
a
.
2
Using a thumb pull up the rubber cap
firmly in the direction indicated by the
arrow
b
.
a
b
c
Anode Button
2-4. PICTURE TUBE REMOVAL
• Remove the D, A and J boards (Refer to 2-3.)
1
2
3
Anode cup
Cushion
4
5
6
Neck assy
Deflection yoke
Picture tube
Picture tube shield
Four screws
(Tapping screw 5)
Содержание Trinitron CPD-200GS
Страница 22: ...5 16 5 4 SEMICONDUCTORS ...
Страница 23: ...5 17 ...