5
(GB)
qj
LINE A IN/OUT connectors
To monitor the signal fed through these connectors,
keep the LINE/RGB input selector and the A/B, SDI/
RGB input selector released (LINE and A).
Y/C IN (4-pin mini DIN): Connect to the Y/C output
of a video camera, VCR or other video equipment.
Y/C OUT (4-pin mini DIN): Loop-through output of
the Y/C IN connector. Connect to the Y/C input of
a VTR or another monitor.
VIDEO IN (BNC): Connect to the video output of a
video camera, VTR or other video equipment.
VIDEO OUT (BNC): Loop-through output of the
VIDEO IN connector. Connect to the video input
of a VTR or another monitor.
Note
When a plug is connected to the Y/C IN connector, the
VIDEO IN connector is automatically disconnected.
qk
LINE B IN/OUT connectors
To monitor the signal fed through these connectors,
keep the LINE/RGB selector released (LINE) and
depress the A/B, SDI/RGB input selector on the front
panel (B).
VIDEO IN (BNC): Connect to the video output of a
video camera, VTR or other video equipment.
VIDEO OUT (BNC): Loop-through output of the
VIDEO IN connector. Connect to the video input
of a VTR or another monitor.
ql
REMOTE connector (8-pin mini DIN)
Turning the tally lamp on or off and the input setting
are remotely controlled by connecting another
equipment to this connector.
For the pin assignment of this connector, see
“Specifications” on page 9 (GB).
w;
EXT SYNC (external sync) IN/OUT connectors
(BNC)
To use these connectors, depress the SYNC INT/EXT
button on the front panel (EXT).
IN: When this monitor operates on an external sync
signal, connect the reference signal from a sync
generator to this connector. In this case, depress
the SYNC INT/EXT selector (EXT) on the front
panel.
OUT: Loop-through output of the EXT SYCN IN
connector. Connect to the external sync input of
video equipment to be synchronized with this
monitor.
wf
RGB/Y R-Y B-Y selector
Rear
wh
AC IN socket
qj
LINE A IN/OUT connectors
qk
LINE B IN/OUT connectors
ql
REMOTE connector (8-pin mini DIN)
w;
EXT SYNC (external sync)
connectors (BNC)
wa
V HOLD (vertical hold) control
ws
DC 12V IN jack (XLR, 4 pin)
wd
COMPONENT LEVEL selector
wj
COMPONENT SDI IN/OUT
connectors (BNC)
wg
RGB/COMPONENT input
connectors (BNC)
