52
Adjustment Window
Ch
apt
er 3 Men
u
Wind
o
w
Adjustment Window
[ ]: default setting preset at the factory
Picture (Manual) Tab Window
This window is used to adjust the contrast, brightness and
chroma and to set the preset value for picture adjustment
preset data.
a
Destination
The picture adjustment preset data to be set is displayed.
To change the picture adjustment preset data to be
adjusted, you can select from Picture Preset 1, Picture
Preset 2, Picture Preset 3, Picture Preset 4, Picture Preset 5
and Picture Preset(D-Cine) in Picture Preset of the
Configurations tab window of the Main Operation
window.
For information about the Configurations tab window of
the Main Operation window, see page 44.
Contrast:
Sets the contrast. Sets to 0 to 2500. [1000] (for
Picture Preset 1 to Picture Preset 5), [480] (for Picture
Preset(D-Cine))
Bright:
Sets the brightness. Sets to –500 to +500. [0]
Chroma:
Sets the chroma. Sets to 0 to 2000. [1000]
Phase
: Currently unavailable
To change the setting
Change the value in the corresponding spin box. The
trackbar is also usable.
1
2
3
