44
Main Operation Window
Ch
apt
er 3 Men
u
Wind
o
w
Main Operation Window
[ ]: default setting preset at the factory
Configurations Tab Window
This window is used to select the input signal or set the
basic settings to display the picture correctly.
a
Format
Sets the input signal type.
Set the combo box 1 (left) and combo box 2 (right).
You can select the item depending on the screen mode.
Combo box 1
3G/HD-SDI Auto:
Sets the signal format
automatically according to the Sampling Structure, Bit
Depth, Picture and transport scanning method
information for the Payload ID of SMPTE-352M
standard superimposed on the input signals and the
result of the signal judgment by the monitor when the
BKM-250TG is installed.
You can confirm the Payload ID information and the
signal format status of the current monitor in SDI
Payload ID Status (page 78) of each Screen tab
window of the Information window.
1
2
3
4
7
6
5
8
9
Note
