TDM-iP10 (M).GB.3-876-237-12(1)
Controlling the iPod
Performing basic operations
You can operate your iPod by its control buttons,
the control buttons of a connected AV system with a
DIGITAL MEDIA PORT interface, and the remote
supplied with the AV system.
Notes
To use an iPod, refer to the user’s guide of your iPod.
Before disconnecting the iPod, pause playback.
Basic Operations
The following operations are available with the AV
system or the remote.
Press
To
Start play.
/
Pause play.
/
Works much like running your
thumb around the Click Wheel
on the iPod counterclockwise
(clockwise).
/ /ENTER
Works much like the center button
on the iPod.
/
Press and release to skip to the next
(previous) song/video or chapter of
audiobook/podcast.
Hold down to fast-rewind (fast-
forward).
/
Fast- forward (fast- rewind) play.
/MENU/
DISPLAY/
RETURN/TOOL
MENU
Works much like the Menu button
on the iPod.
/
Adjusts the volume level.
Notes
Point the remote at the AV system.
Depending on the connected AV system, the operation or buttons
may differ. Refer to the AV system’s operating instructions.
While playing video, you cannot use
/
. You can fast-rewind
(fast-forward) by holding down
/
.
To change the volume level, use the volume controls on the
connected AV system or the remote. The volume level does not
change even if adjusted on the iPod.
It may take time to start playback depending on the contents.
Additional Information
Precautions
On safety
Should any solid object or liquid fall into the system,
unplug the system and have it checked by qualified
personnel before operating it any further.
On placement
Do not place the unit in an inclined position.
Do not place the unit in locations where it is;
Extremely hot or cold
Dusty or dirty
Very humid
Subject to vibrations
Subject to direct sunlight.
Use caution when placing the unit on surfaces that
have been specially treated (with wax, oil, polish, etc.)
as staining or discoloration of the surface may result.
On heat buildup
Although the unit heats up during operation, this is not
a malfunction.
Place the unit in a location with adequate ventilation to
prevent heat buildup in the unit.
If you have any questions or problems concerning your
unit, please consult your nearest Sony dealer.
Cleaning the unit
Clean the unit with a soft cloth slightly moistened with
mild detergent solution. Do not use any type of abrasive
pad, scouring powder or solvent such as thinner, benzine
or alcohol.
Specifications
General
Power requirements:
DC IN: 5 V, 600 mA (via DIGITAL MEDIA PORT)
Dimensions: Approx.
80 × 22(h) mm
Cable length: 0.6 m
Supplied accessories:
iPod Dock Adapters (1set)
Design and specifications are subject to change without notice.
Troubleshooting
Should you encounter a problem with your unit, find
your problem in the troubleshooting checklist below
and take the indicated corrective action. If the problem
persists, contact your Sony dealer.
Note that if service personnel changes some parts during
repair, these parts may be retained.
When bringing the system in for repairs, be sure to bring
in the entire system.
This product is a system product, and the entire system is
needed to determine the location requiring repair.
The remote does not function.
Remove any obstacles.
Point the remote at the AV system’s sensor.
The distance between the remote and the AV system is
too far.
Replace the battery.
Make sure the iPod* is securely connected.
Select the DMPORT function on the AV system.
Turn on and off the AV system.
Video/photo image from the iPod does not
appear on the TV screen.
The unit does not support video output. Even if your
iPod has video/photo capability, you cannot view video
or photo content on the TV or other video devices.
There is no sound.
Check the connections.
Make sure the unit is securely connected.
Make sure the iPod* is securely connected.
Make sure the iPod* is playing music.
It may take time to start playback depending on the
contents.
There is severe hum or noise.
Move the unit away from the source of noise.
The sound is distorted.
Reduce the volume of the connected AV system.
Set the “EQ” setting of the iPod to “Off” or “Flat”.
* See “Compatible iPod models”.
Compatible iPod models
The compatible iPod models are as follows. Make
sure your iPod is updated to the latest firmware
version.
iPod touch
iPod nano 3rd
generation
(video)
iPod classic
iPod
nano 2nd
generation
(aluminum)
iPod 5th
generation
(video)
iPod nano 1st
generation
iPod 4th
generation
(color display)
iPod 4th
generation
iPod mini
Notes
This unit is designed for iPod only. You can not connect any other
portable audio players.
Sony cannot accept responsibility in the event that data recorded to
iPod is lost or damaged when using an iPod connected to this unit.
This product has been designed specifically to work with iPod and
has been certified to meet Apple performance standards.
TDM-iP10 (M) is not compatible with iPhone.
