Sony TA-KMSW500, Руководство по эксплуатации

Страница: 21 / 76

21 GB
Ge
tting Star
te
d
4b: Connecting the video components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to “Component to be connected” below
for the pages which describe how to connect
each component.
Before connecting the cords, be sure to
disconnect the AC power cord.
After hooking up all your components,
proceed to “5: Connecting the antennas” (page
28).
Component to be connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Note
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
How to hook up your
components
Component Page
TV 19
With HDMI jack 22
DVD player 24
Satellite tuner/Set-top box 25
DVD recorder, VCR 26
Camcorder, video game, etc. 26
Video input/output jack to be
connected
HDMI VIDEO
Y
P
B
/C
B
P
R
/C
R
COMPONENT VIDEO
Digital Analog
High quality image