Sony TA-DA9000ES, Руководство по эксплуатации

Страница: 24 / 60

24
GB
A
SW: Lights up when sub woofer selection is
set to “YES” (page 18). While this indicator
lights up, the amplifier creates a sub woofer
signal based on the LFE signal in the disc
being played back or the low frequency
components of the front channels. This
indicator does not light during the 2CH
STEREO mode or when 2 channel signal is
input while [A.F.D. AUTO] is selected and
[A.F.D. 2CH SW] in the SURR SET UP menu
is set to “OFF”.
B
Playback channel indicators:
The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the amplifier downmixes the
source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SBL (Surround back
Left)*, SBR (Surround back right)*, SB
(Surround Back (the surround back
components obtained by 6.1 channel
decoding))
Example:
Recording format (Front /Surround): 3/2.1
Output channel: Surround speakers absent
Sound Field: A.F.D. AUTO
* Lights up when the test tone for SBL or SBR
signal is output.
C
; DIGITAL (EX): Lights up when Dolby
Digital signals are input. “EX” lights up when
Dolby Digital EX signals are input.
D
INPUT: Lights up constantly. One of the input
indicators also lights up according to the
current input.
E
AUTO: Lights up when INPUT MODE is set
to “AUTO 2CH” (page 32).
F
i.LINK: Lights up when an i.LINK component
is connected.
G
DTS (-ES):
Lights up when DTS signals are
input. “-ES” lights up when DTS-ES signals
are input. When playing a DTS format disc, be
sure that you have made digital connections
and that INPUT MODE is NOT set to
“ANALOG 2CH FIXED” (page 32).
H
COAX: Lights up when INPUT MODE is set
to “AUTO” and the source signal is a digital
signal being input through the COAXIAL
terminal, or when INPUT MODE is set to
“COAXIAL FIXED” (page 32).
I
OPT:
Lights up when INPUT MODE is set to
“AUTO” and the source signal is a digital
signal being input through the OPTICAL
terminal, or when INPUT MODE is set to
“OPTICAL FIXED” (page 32).
J
ANALOG:
Lights up when INPUT MODE is
set to “AUTO” and no digital signal is input to
COAXIAL or OPTICAL jack, or when
INPUT MODE is set to “ANALOG 2CH
FIXED” (page 32).
K
MULTI CH IN 1/2: Lights up when “MULTI
CH IN 1” or “MULTI CH IN 2” is selected.
L
SLEEP: Lights up when sleep timer is
activated.
M
D.RANGE: Lights up when dynamic range
compression is activated (page 41).
N
EQ: Lights up when the equalizer is activated.
About the indications in the display
;
;
MULTI CH IN 1 2 INPUT AUTO I.LINK COAX OPT ANALOG
DIGITAL EX DTS-ES 96/24 D.RANGE
MOVIE MONO MEMORY
SLEEP
STEREO MATRIX CINEMA MUSIC
PRO LOGIC II EQ RDS NEO:6 DISCRETE H.A.T.S.
L.F.E.
L SW
SL SR
C
S
R
SB SBL SBR
1 2 3 9 8 7 qs 0 qa
qd qf qh qj qk ql w; wa ws wd wf
4 5 6
qg
L SW
SL SR
C R