Sony ta-ax44, Руководство по обслуживанию

Страница: 5 / 36

SPEAKER A and
PHONO inputs TUNER inputs SPEAKER B terminals AC OUTLET
S
Remote control connector
Ground terminal
CORDER 2 jacks
TAPE inputs and REC OUT (recording output) jacks
DA D/A (auxiliary) inputs
ORDER 1 jacks
TAPE inputs and REC OUT (recording output) jacks
The
Photo: AEP, UK model
AC outlets
These are used to power other audio components whose power
consumption is less than the wattage indicated below the ac
outlet.
The SWITCHED outlet is controlled by the front panel POWER swit-
ch.
The UNSWITCHED outlet (only on the E model) is not controlled
by the POWER switch.
Do not connect any electrical home appliance such as an electric
iron, fan, TV or other high-wattage equipment to these ac outlets.
The four groups of ac power cord plugs and ac outlets on your
amplifier rear panel are illustrated below
Group A
Group
E model)
AC outlet
SWITCHED TOTAL
100 W MAX
SWITCHED TOTAL
The wires in this mains lead adaptor are coloured in accor-
dance with the following code.
UNSWITCHED
SWITCHED
100 W MAX
TOTAL
100
W
on the can supply power to the
Tuner ST-JX44L. ST-JX-22L
Turntable PS-LX5
Tape deck TC-FX44
For the Customers in the United Kingdom
The mains lead plug of your apparatus is a type especially
designed to be connected only to the Sony RM-44 system remote
controller. The remote controller has a receptacle on the rear to
receive this plug to supply mains power to other components of
your audio system.
To connect the apparatus directly to a mains power point in your
house, firmly insert the
plug into the supplied mains lead
adaptor.
lead
mains lead adaptor
- C A U T I O N
Connect the plug only to the mains outlet on the com-
ponent mentioned above or to the supplied mains lead adap-
tor.
-Important
B l u e N e u t r a l
Brown Live
As the of the wires in the mains lead adaptor of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows
The wire which is coloured blue must be connected to the ter-
minal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
*
*Use
the plug adaptor to connect the an outlet the house
However. when power among the Sony components.
adaptor not needed