2-25
SVT-N72P (E)
3-13. Brakes
3-13-1. S Brake Assembly, T Brake
Assembly, T Brake Act Slide
1.
Refer to Section 3-3-1 and remove the cassette mecha-
nism assembly.
2.
Remove the two clamps
1
, then remove the T brake
act slide
2
.
n
You can remove the S brake assembly
7
and the T
brake assembly
5
without removing the T brake act
slide
2
.
3.
Remove the brake spring
3
.
4.
Remove the two clamps
4
simultaneously, then
remove the T brake assembly
5
.
5.
Remove the clamp
6
, then remove the S brake
assembly
7
.
Assembly Notes:
1.
Apply grease (VHJ-0100) to the shafts
8
and
9
.
2.
When fitting the T brake act slide
2
, align the mark
0
with the shaft
!-
.
Fig. 3-13-1
3-13-2. Brake Control Lever and Brake Act
Lever Assembly
1.
Refer to Section 3-2 and remove the mechanism unit.
2.
Refer to Section 3-15 and remove the wheel gear 2.
3.
Refer to Sections 3-12-1, then remove the reel belt and
the reel pulley.
4.
Remove the clamp
1
, then remove the wheel gear 1
2
.
5.
Remove the clutch change spring
3
.
6.
Remove the clamps
4
and
5
, then remove the brake
control lever
6
. Remove the clamp
4
on the topside
of the mechanism chassis.
7.
Remove the brake return spring
7
.
8.
Refer to Section 3-8 and remove the worm gear
assembly.
9.
Remove the clamp
8
and clamp
5
, then remove the
brake act lever assembly
9
. To maintain the perfor-
mance of the brake act lever assembly
9
, do not
disassemble it.
Assembly Notes:
1.
Apply grease (VHJ-0100) to the shafts
0
and
!-
, to
the teeth of the wheel gear 1
2
, and to the pin
!=
of
the brake control lever
6
.
2.
Put the pin
!=
of the brake control lever
6
into the
cam groove
![
of the crescent slide.
3.
Before fitting the wheel gear 1
2
, align the hole
!]
with the hole
!\
on the mechanism chassis.
4.
Refer to Section 3-15 and align the wheel gear 2.
Fig. 3-13-2
3
Brake spring
0
Mark
1
Clamp
9
Shaft
8
Shaft
!-
Shaft
4
Clamps
1
Clamp
5
T brake
assembly
2
T brake act slide
7
S brake
assembly
6
Clamp
1
Clamp
7
Brake return spring
6
Brake control lever
