Sony SVP-DC1, Руководство по эксплуатации

Страница: 5 / 16

5
SONY SVP-DC1 (E) 3-194-445- 02 (3)
‘
’
‘
’
Power Supply
PC
This Video Cassette Player operates on 12 V DC.
When the input level of the PC (Power Control) terminal on
the Video Cassette Player is HIGH (+12 V), the POWER
switch lights up and the power is supplied to the Video
Cassette Player. To turn it on, press the POWER switch.
When the input level becomes LOW (0 V), the power of the
VCP is turned off. If the tape is inserted in the cassette
compartment (in stop, play, fast-forward or rewind mode),
the VCP stops the tape operation, ejects the tape and turns
off.
Code numbers of controllable TVs;
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
TV.
Manufacturer Code
number
Sony 01
Akai 04
AOC 04
Centurion 12
Coronado 03
Curtis Mathes 12
Daytron 12
Emerson 03,04,14
Fisher 11
General Electric 06,10
Gold Star 03,04,17
Hitachi 02,03
J.C. Penny 04,12
JVC 09
KMC 03
Magnavox 03,08,12
Marantz 04,13
MGA/Mitsubishi 04,12,13,17
NEC
04,12
Manufacturer Code
number
Panasonic 06, 19
Philco 03, 04
Philips 08
Pioneer 16
Portland 03
Quasar 06, 18
Radio Shack 05, 14
RCA 04, 10
Sampo 12
Sanyo 11
Scott 12
Sears 07, 10, 11
Sharp 03, 05, 18
Sylvania 08, 12
Teknika 03, 08, 14
Toshiba 07
TVS 20
Wards 03, 04, 12
Yorx 12
Zenith 15
Notes
• If the TV uses a different
remote control system from
the one programmed to
work with the VCR, you
cannot control your TV with
the remote commander.
• If you enter a new code
number, the code number
previously entered will be
erased.
• When you replace the
batteries of the remote
commander, the code
number automatically resets
to 01 (Sony). Reset the
appropriate code number.
Note
• Before connecting the
battery, check the polarity.
If the polarity of the battery
is not correct, a fuse may be
blown out.