15
(US)
3
Set “TAPE END” to REW or EJECT using DATA
+/–.
[ SET UP ]
[ USED TIME ]
HEAD 00005H
END ALARM
TAPE END
CLOCK ADJ
BUZZER
THREAD CHECK
TAPE
APC
T-120
END
REW
ON
0 1 : 0 0
ON
ON
REW: when the tape comes to the end, the VCR
rewinds the tape automatically and enters stop
mode at the beginning of the tape.
EJECT: when the tape comes to the end, the tape
is ejected automatically.
4
Press MENU twice to return to the normal display.
Monitoring the recording
condition
You can check the recording condition by pressing
(
PLAY while recording.
Press
(
PLAY while recording.
After the tape is rewound for about three seconds and
played back for about two seconds, the unit returns to
the original recording mode.
Notes
• While monitoring the recording condition, recording
is interrupted.
• When the recording is not performed correctly, an
alarm signal is output from the WARNING OUT
terminal.
6
r
P
p
0
(
)
(
PLAY
Checking the tape threading
To ensure correct operation, the VCR checks
automatically the tape threading whenever you insert a
tape, and it takes about 5 seconds. If an error is
detected, the VCR ejects the tape.
During this period, tape operation buttons such as
(
PLAY,
r
REC,
)
FF and
0
REW do not
function.
If you consider it unnecessary to check the tape
threading, you can cancel it in the SET UP menu.
1
Press MENU and select 3.SET UP/USED TIME
using SHIFT
v
, then press SHIFT
b
.
The SET UP menu appears on the screen.
2
Press SHIFT
v
to flash the setting of “THREAD
CHECK.”
[ SET UP ]
[ USED TIME ]
HEAD 00005H
END ALARM
TAPE END
CLOCK ADJ
BUZZER
THREAD CHECK
TAPE
APC
T-120
END
REW
ON
0 1 : 0 0
OFF
ON
3
Set to OFF to cancel the tape threading check
using DATA +/–.
[ SET UP ]
[ USED TIME ]
HEAD 00005H
END ALARM
TAPE END
CLOCK ADJ
BUZZER
THREAD CHECK
TAPE
APC
T-120
END
REW
ON
0 1 : 0 0
OFF
OFF
4
Press MENU twice to return to the normal display.