Sony SU-WL53, Инструкция по эксплуатации

Страница: 6 / 96

6
(GB)
Step 2:
Deciding on the
installation location
1
Referring to the TV installing
dimensions table on page 14,
decide on the installation location.
Allow for suitable clearance between the TV and the
ceiling and protruding parts of the wall as shown
below.
Note
If you intend to route the cables in the wall, make a
hole in the wall to insert the cables.
2
Referring to the table on page 16,
determine the positions of the
screws for installing the Base
Bracket.
Unit: mm
100 100
10
0
3
00
WARNING
The wall that the TV will be installed on should be
able to support a weight of at least
four times that of
the TV (page 14).
Determine the strength of the wall the TV will be
installed on. Reinforce the wall sufficiently, if
necessary.
Step 3:
Installing the Base
Bracket on the wall
1
Secure the Base Bracket to the
wall using four or more M8 or
equivalent screws (not supplied).
1 Determine the screw holes (e, k) for attaching the
Mounting Hook Unit to the Base Bracket. Then
temporarily attach them securely using the supplied
screws (+BVST4 × 12).
Screw (+BVST4 × 12)
Base Bracket
Mounting
Hook Unit