Sony SU-LW1 Instructions (SU-LW1 Wall-Mount Bracket), Инструкция по эксплуатации

Страница: 18 / 264

18
(GB)
3
1
2
3
4
6
Mount the display on the Plate
Unit.
1
To lock the arms temporarily, put the two
securing screws (+B5
×
L12, supplied) in the
holes on the arm bases B from the outside.
2 Hang the upper hooks of the Mounting Hook
Units on the upper shafts of the arms.
3
Place the lower hooks of the Mounting Hook
Units on the lower shafts of the arms.
4
Pushing the display towards the Plate Unit,
lift it up slowly and hang the lower hooks of
the arms onto the lower shafts.
5
Check to make sure that all eight hooks are
properly hung on the corresponding shafts.
6
Tighten the securing screws attached in
1
.
Note
If you push the securing screws into the holes
too far (
1 ), the tips of the screws will get in the
way when you hang the lower hooks on the
shafts (
4
).
Do not push
the screws in
too far.