6(E)
SU-C3390
6.
Mounting the Equipment for
19-inch Rack
Fix the equipment to the console with the four screws RK
5
x
16 and the trapezoidal washers. For the equipment
considered to be too heavy to support, mount support angle.
How to mount the support angle:
Fix a couple of support angles to the console using the
two screws B 4
x
8 respectively.
Model of support angle : SUA-AN3020C (option)
Using the blank panels, plug the openings not to be
connected with any equipment. Fix the panels using the
screws RK 5
x
16 and the ornamental washers in the same
way as the equipment is fixted.
1U: SUA-BP3021 (option)
2U: SUA-BP3022 (option)
3U: SUA-BP3023 (option)
7.
Installing the Console
c
Prevent damage to the power cord of the mounted
equipment.
The damaged cord may cause the fire or electric shock.
Exercise care the power cord to avoide pinching or
contacting a sharp edge.
(1) After mounting the equipment, transfer the console to
the installation site and lock the all casters.
(2) Connect the signal cable and the power cable. Slack
the cables slightly.
(3) Mount the rear cover and bottom plate that have been
removed in Section 3-3.
B 4
x
8
B 4
x
8
Support angles
RK 5
x
16 Ornamental washer
Lock
