Sony STRDG920 - STR AV Receiver, Руководство по эксплуатации

Страница: 98 / 116

98 US
Checking the XM Radio ID
1
Press XM to select “XM RADIO”.
You can also use INPUT SELECTOR on the
receiver.
2
Press or TUNING – to select
channel 0.
You can also press TUNING MODE on the
receiver to select “AUTO”, then turn
/– to select channel 0.
3
Check the XM ID on the display and write it
in the space provided here.
ID:________________________________
Selecting channels from a
category (CATEGORY TUNING)
1
Press XM to select “XM RADIO”.
You can also use INPUT SELECTOR on the
receiver.
2
Press CATEGORY MODE repeatedly to
select “ONE CAT”.
•
ALL CAT: You can select a channel from
all the categories. The initial setting is
“ALL CAT”,
•
ONE CAT: You can select a channel from
one category. “CAT” is lights up on the
display when you set to “ONE CAT”
mode.
3
Press CA or CATEGORY – to
select the category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
4
Press or TUNING – to select the
channel.
You can also press TUNING MODE on the
receiver to select “AUTO”, then turn
/– to select the channel.
Selecting a channel number
directly (Direct tuning)
1
After selecting XM Radio, press
D.TUNING.
2
Press SHIFT, then press numeric buttons to
enter the channel number.
3
Press .
Displaying the XM Radio
information
Press DISPLAY repeatedly.
Each time you press DISPLAY while tuning in
the channel, the display changes cyclically as
follows:
Channel name
t Channel number t
Category name
t
Artist name/Feature
t
Song/Program title t Signal Strength t
Sound field type
t
Volume
1
Select a channel you want to
preset.
For details on this operation, refer to
“Selecting channels from a category
(CATEGORY TUNING)” (page 98).
2
Press SHIFT, then press
ENT/MEM.
You can also use MEMORY/ENTER on
the receiver.
“MEM” lights up on the display.
3
Press or PRESET –
to select a preset number.
You can also select the number by
pressing SHIFT, then numeric buttons.
Preset numbers from 1 to 30 are available.
Channel 1 is preset for the preset numbers
when you purchase the receiver.
4
Press ENT/MEM.
If SHIFT indicator is light off before you
press ENT/MEM, press SHIFT.
You can also use MEMORY/ENTER on
the receiver.
“MEM” lights off.
5
Repeat steps 1 to 4 to preset
another channel.
Presetting XM Radio channels