Sony STRDG820 - STR AV Receiver, Руководство по обслуживанию

Страница: 5 / 96

STR-DG820
5
About the indicators on the display
RB
RT RM RG XG XE XT XB X RL RI RK RE RH
Name Function
"
SW Lights up when the audio signal
is output from the
SUBWOOFER jacks.
#
LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
$
COAX
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack.
%
OPT Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack.
&
D/
D EX/
D+/
TrueHD
“ D” lights up when the
receiver is decoding Dolby
Digital signals.
“ D EX” lights up when the
receiver is decoding Dolby
Digital Surround EX signals.
“ D+” lights up when the
receiver is decoding Dolby
Digital Plus signals.
“ TrueHD” lights up when
the receiver is decoding Dolby
TrueHD signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO”.
'
Neural - THX Lights up when the receiver
applies Neural - THX
processing to input signals.
(
DTS/
DTS-ES/
DTS 96/24
“DTS” lights up when the
receiver is decoding DTS
signals.
“DTS-ES” lights up when the
receiver is decoding DTS-ES
signals.
“DTS 96/24” lights up when the
receiver is decoding DTS
96 kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
“AUTO”.
)
D.RANGE Lights up when dynamic range
compression is activated.
*
CAT Lights up when category mode
is set to “ONE CAT” during
XM Radio operation.
+
SP A/SP B/
SP A+B Lights up according to the
speaker system used.
However, these indicators do
not light up if the speaker output
is turned off or if headphones
are connected.
,
SLEEP Lights up when the sleep timer
is activated.
-
Tuner
indicators Lights up when using the
receiver to tune in radio stations,
etc.
Name Function
(US, Canadian
models)
Note
“RDS” appears for models of
area code CEL, CEK, ECE
only.
Name Function
.
A.DIRECT Lights up when the receiver is
processing Analog Direct
signals.
/
MEM Lights up when a memory
function, such as Preset
Memory etc., is activated.
0
XM
(US, Canadian
models)
Lights up when XM Mini Tuner
and Home Dock are connected
and “XM RADIO” is selected.
1
PL/
PL II/
PL IIx
“ PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
“
PL II” lights up when the
Pro Logic II decoder is
activated.
“
PL IIx” lights up when the
Pro Logic IIx decoder is
activated.
Note
Dolby Pro Logic IIx decoding
does not function for signals
with a sampling frequency of
more than 48 kHz.
2
NEO:6 Lights up when DTS Neo:6
Cinema/Music decoder is
activated.
3
EQ Lights up when the equalizer is
activated.
4
DTS-HD
MSTR/
DTS-HD HI
RES
“DTS-HD MSTR” lights up
when the receiver is decoding
DTS-HD Master Audio signals.
“DTS-HD HI RES” lights up
when the receiver is decoding
DTS-HD High Resolution
signals.
5
LPCM Lights up when Linear PCM
signals are detected.
6
ANALOG Lights up when INPUT MODE
is set to “ANALOG” or no
digital signals are detected
when INPUT MODE is set to
“AUTO”.
7
DMPORT Lights up when DIGITAL
MEDIA PORT adapter is
connected and “DMPORT” is
selected.
8
HDMI Lights up when the receiver
recognizes a component
connected via an HDMI IN jack.
9
Playback
channel
indicators
L
R
C
SL
SR
S
SBL
SBR
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Speaker pattern: 3/0.1
Recording format: 3/2.1
Sound Field: A.F.D. AUTO
SW
L C R
SL SR