52
US
Listening to FM/AM
radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before
operation, be sure you have connected the
FM and AM antennas (aerials) to the
receiver (page 34).
1
Select “Listen” from the home
menu, then press
.
2
Select “FM/AM”, then press
.
FM/AM screen
You can select and operate each item on the
screen by pressing
V
/
v
/
B
/
b
and
.
1
Band indication (page 52)
2
Frequency indication (page 52)
3
Preset station list (page 54)
1
Select “Listen” from the home
menu, then press
.
2
Select “FM/AM”, then press
.
The FM/AM screen appears.
3
Select the band indication.
4
Press
V
/
v
repeatedly to select
“FM” or “AM”, then press
.
1
Select the frequency indication on
the FM/AM screen.
2
Press
V
/
v
.
Press
V
to scan from lower to higher
frequency stations, press
v
to scan
from higher to lower stations.
The receiver stops scanning whenever
a station is received.
In case of poor FM stereo
reception
1
Tune in the station you want to listen
to using Auto Tuning, Direct Tuning,
or select the preset station you want
(page 52).
2
Press OPTIONS.
The options menu appears.
You can set FM mode in the options menu
when the frequency indication is selected.
3
Select “STEREO/MONO”, then
press
.
4
Select “MONO”, then press
.
Tuner Operations
V
/
v
/
B
/
b
,
OPTIONS
Numeric
buttons
D.TUNING
Toggling between FM
and AM radio
Tuning to a station
automatically (Auto
Tuning)
Note
