Sony STR-DH500, Руководство по обслуживанию

Страница: 5 / 68

STR-DH500
SECTION 1
GENERAL
This section is extracted
from instruction manual.
• US, Canadian model
6
US
Description and location of parts
Front panel
?/1
PHONES
INPUT SELECTOR
E D O M G N I N U T E D O M T U P N I
MASTER VOLUME
DISPLAY DIMMER MUTING
MEMORY/
ENTER
2CH/
A.DIRECT A.F.D. MOVIE MUSIC TUNING
1 3 4 2
6 7 8 qa 9 s q q;
5
Name Function
A
? / 1
(on/standby)
Press to turn the receiver on
or off (page 23, 27, 28, 44).
B
INPUT
SELECTOR
Turn to select the input
source to play back (page 25,
26, 27, 28, 44, 45, 48, 49, 53).
C Display The current status of the
selected component or a list
of selectable items appears
here (page 7).
D
Remote
sensor
Receives signals from remote
commander.
E
MASTER
VOLUME
Turn to adjust the volume
level of all speakers at the
same time (page 25, 26, 27,
28).
F
MUTING
Press to turn off the sound
temporarily.
Press MUTING again to
restore the sound (page 26).
G DIMMER Press repeatedly to adjust
brightness of the display.
Name Function
H
DISPLAY
Press to select information
displayed on the display
(page 52).
I
2CH/
A.DIRECT
Press to select a sound field
(page 39).
A.F.D.
MOVIE
MUSIC
J
TUNING
MODE
Press to operate the tuner
(FM/AM) (page 45).
/–
MEMORY/
ENTER
K
INPUT MODE
Press to select the input mode
when the same components
are connected to both digital
and analog jacks (page 49).
L
PHONES jack
Connects to headphones
(page 57).
7
US
About the indicators on the display
SW LFE
L C R
SL S SR
PLII
D
OPT DTS MEMORY
MONO SLEEP ST D.RANGE COAX
HDMI
6 4 3 5 1 2
q;
5
7 8 9
Name Function
A
SW
Lights up when subwoofer
selection is set to “YES” (page
36) and the audio signal is
output from the SUBWOOFER
jack.
B
LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C Input
indicators
OPT
COAX
HDMI
Light up to indicate the current
input.
Lights up when BD input is
selected. However, “NO
INPUT” appears on the display
if no digital signal is input
through the OPTICAL jack.
“OPT” also lights up when
SAT input is selected if INPUT
MODE is set to “AUTO” and
the source signal is a digital
signal being input through the
OPTICAL jack.
Lights up when DVD input is
selected. However, “NO
INPUT” appears on the display
if no digital signal is input
through the COAXIAL jack.
Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack (page 18).
Name Function
D
DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
“AUTO” (page 49).
continued
E Tuning
indicators
MEMORY
Lights up when using the
receiver to tune in radio
stations (page 45), etc.
A memory function, such as
RDS A station that provides RDS
services is tuned in.
Note
“RDS” appears for models of
area code AEP, UK only.
Preset Memory (page 47), etc.,
is activated.
MONO
ST
Monaural broadcast
Stereo broadcast
A preset station number
appears when the preset radio
station is selected.
Note
The preset station number will
change according to the preset
station you select.
For details on presetting radio
stations, see page 47.
8
US
Name Function
F
Dolby Pro
Logic
indicators
PL
PLII
Lights up one of the respective
indicators when the receiver
applies Dolby Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
Dolby Pro Logic
Dolby Pro Logic II
Note
These indicators do not light up
if both the center and surround
speakers are set to “NO” (page
36) and you select a sound field
using the A.F.D. button.
G
D
Lights up when the receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO” (page 49).
H SLEEP Lights up when the sleep timer is
activated (page 52).
I
D.RANGE
Lights up when dynamic range
compression is activated (page
30).
J Playback
channel
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.) indicate
the channels being played back.
The boxes around the letters vary
to show how the receiver
downmixes the source sound
(based on the speaker settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When surround
speakers are set to “NO” (page
31)
Sound Field: A.F.D. AUTO
SW
L C R
SL SR