manualshive.com logo in svg

Sony StorStation AITi100, Руководство пользователя

Поделиться
Скачать
Sony StorStation AITi100 Скачать руководство пользователя страница 9

9

Transportation

• Keep the original packing materials to facilitate safe transportation of the

drive.

• Always remove the tape/media cartridge before moving the drive. After

removing the drive from the computer, repack the drive into its original
packing.

Useable Cartridges

The AITi200 can be used with data cartridges marked with the AIT-E
Turbo, AIT-1 Turbo, AIT-2 Turbo, AIT-1, or AIT-2 logo.
The AITi100 can be used with data cartridges marked with the AIT-E
Turbo, AIT-1 Turbo, or AIT-1 logo.
The AITi50 can be used with data cartridges marked with the AIT-E Turbo
logo.

Note

• Be sure to use only the cartridges designed specifically for AIT.

• Do not use anything but AIT cartridges with this system, as doing so can

damage the AIT drive. Although commercially available 8mm videotapes
resemble AIT cartridges in appearance, they have entirely different
specifications and cannot be used.

SCSI Termination

The  AITi200, AITi100, and AITi50 conform to the Microsoft PC97
standard, which requires the internal- (naked) drive to be terminated with
an external terminator.

Microsoft PC97 SCSI requirements

SCSI peripherals must not terminate the bus. Both internal and external
cable ends are instead terminated by plug-in connectors.

Terminator

68p cable

Host Computer Wide SCSI

This drive

Example of SCSI setup

Содержание StorStation AITi100



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды