15
GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2886257121SDE700_GB\2886257121\GB04REC_ST-
SDE700-CEL.fm
masterpage: Right
ST-SDE700
2-886-257-
12
(1)
Re
c
e
iv
in
g D
AB Br
oa
dc
a
s
ts
Before you can receive
DAB stations
(DAB INITIAL SCAN)
Before you can receive DAB stations, you
must register the contents of broadcast (service
components) so that they can be received by
this tuner using the DAB INITIAL SCAN
procedure.
Be sure to use the buttons on the tuner for this
operation.
1
Press BAND repeatedly to
select the DAB band.
2
Press DAB INIT SCAN.
“DAB SCAN” flashes on the display.
3
Press ENTER.
“SCAN ON” appears in the display and
the tuner scans and stores all the DAB
broadcasting contents and registers them
in this tuner.
When done, “FINISH” appears in the
display momentarily and the tuner returns
to the normal operation.
Notes
• If you have not registered the contents of broadcast
(service components) in DAB band, “DAB TUNE”
appears in the display for a while, then
“DAB _ _ _ _” appears. “PLEASE RUN DAB
SCAN FOR DAB STATION” will then scroll
across the display. In this case, do the DAB
INITIAL SCAN procedure (page 15).
• Buttons on the tuner or supplied remote will not
function during DAB INITIAL SCAN procedure,
except POWER.
• If you move to another area, repeat this procedure
to store stations in your new area.
• This procedure does not create any presets.
• This procedure clears all previously stored presets.
• For details on presets, see “Presetting DAB
1
Press DAB to select the DAB
band.
The last received station is tuned in.
When selecting DAB, “DAB TUNE” will
appear in the display while the tuner is
collecting DAB data. Please wait until
this message disappears.
Receiving DAB Broadcasts
1
2
3
4
5
6
7
8
9
0
DIMMER
DISPLAY
NAME IN
FM MODE
TUNING MODE
MEMORY
RETURN
ENTER
BAND
DIRECT
PRESET
DAB
INIT SCAN
AUTO-BETICAL
SELECT
POWER
TUNING/SELECT
2
3
1
Automatic tuning
ENTER
MEMORY
>
10
10/0
DAB
FM
AM
PRESET
AUTO
TUNING
1
2
continued
GB01COV_ST-SDE700-CEL.book Page 15 Tuesday, July 25, 2006 4:52 PM