Sony SST-6420, Руководство по эксплуатации, Страница: 3 / 6

I. Power pilot LED
J. AC85V~265V Power Cord
K. DC 12V or AC24V/DC 12V Block Terminal
L. DC 12V power input terminal
1
2 3
4
D C 12V
3.1 Auto Iris Lens Connector
● Use the accompanying auto iris lens control connector plug.
For auto iris lens with built-in EE amp.
（
VIDEO Type
）
Set the lens selector switch to “Video” position.
Connector cable leads
1.Red----power 2.NC
3.White----video 4.Black----shielded
For auto iris lens without EE amp.
（
DC Type
）
This is the view from external of camera
Set the lens selector switch to “DC” position.
Connector cable leads
1.Damping coil
（－）
2.Dampling coil
（＋）
3.Driving coil
（＋）
4.Driving coil
（－）
Connect the leads as shown above; refer to the instructions of the lens.
3.2 Power Terminal
3.2.1 DC 12V
SST-6420
model
Connect the power supply to the power-input terminal as shown is the
figure right
1.Power for the camera is 12VCD±10
％
, connector “DC 12V” as positive
and the “G” is common ground.
2.V
ψ terminal for external Vertical phase input as Line lock
3.Connector’s center as positive and the outside being common ground.
3.2.2 AC 24V/DC 12V
SST-6420D
model
This terminal accepts both AC 24V and DC 12V non-polarity
3.2.3 AC 85V~265V
SST-6420P
model
This camera equipped with a universal switching power supply, it can accept
power source input from 85VAC to 265VAC
-3 -