17
3-859-708-01(1)
Installation
1
Insert the supplied screws (2 each for the right/left side)
into the attachment holes of the monitor, and tighten the
screws completely by using a coin.
2
Loosen the angle adjustment screws and open the
pedestal. Hook the speaker to the screws which is
inserted in step
1
.
Push down the speaker until it stops, and fix it firmly.
3
Adjust the angle of the speaker, and tighten the
adjustment angle screws.
To remove the speakers
Take off the speaker pulling it up slightly.
The SS-X7A can be installed in the following Trinitron
color monitors. Be sure to use the supplied screws for the
installation.
PVM-2030/2130QM/2950Q/2950QM and PGM-200R1A/
200R1E/200R1U.
Attachment holes
Supplied
screws
Angle adjustment screw
Monitor
