Sony SRXT615, Руководство по эксплуатации

Страница: 6 / 30

6
Parts Identification
O
v
er
v
iew
[PC Port Setting]: Allows you to change the port
number.
c
[Help] menu
Includes the following commands.
[Version]: Displays version information for SRX
Controller.
d
Projector list
Displays a list of information on projectors that are
connected to the same network (subnet). A projector
that can be connected via either IPv4 or IPv6 will be
listed twice as separate projectors.
When you double-click a projector in the list,
connection to the projector is established and the main
screen of SRX Controller appears.
[Alert]: Not supported.
[Model Name]: Displays the projector’s model name.
[Serial No.]: Displays the projector’s serial number.
[Type]: Displays the protocol type (IPv6/IPv4) that
can be used for connection.
[IP Adress]: Displays the projector’s IP address.
[Connection]: Indicates the network connection
status.
“Connectable” will appear for projectors that can
be selected from SRX Controller.
[Power]: Indicates the power status of the projector.
[Region]: Displays the region in which the projector
is installed (only if this information is registered).
[Location]: Displays the location in which the
projector is installed (only if this information is
registered).
[Name]: Displays the projector’s name (only if this
information is registered).
Main Screen of SRX Controller
a
[File] menu
Includes the following commands.
[Save Log]: Used for maintenance.
For details, contact your dealer or your local
Sony representative.
[Quit]: Quits SRX Controller.
b
[Password] menu
Includes the following commands.
[Reset]: Allows you to reset the password required
for authentication when displaying the
[SERVICE] and [SETTING] tabs.
This menu only appears when a user with
administrator privileges has started SRX
Controller.
[SCREEN CONTROL] block