manualshive.com logo in svg

Sony SRX-T420, Руководство по установке

Поделиться
Скачать
Sony SRX-T420 Скачать руководство пользователя страница 5

3

SRX-T420

Manual Structure

Purpose of this manual

This manual is the installation manual of Data Projector SRX-T420.
This manual is intended for use by trained system and service engineers, and de-
scribes the information for installation of the unit.

The DIF-188 board mounted on this unit as standard equipment is equivalent of 
LKRI-005.
For the service information on the DIF-188 board, refer to the LKRI-005 service 
manual.

Related manuals

The following manuals are prepared for this unit.

.

  Operating Instructions (supplied with this unit)

This manual describes the information required for the actual management and op-
eration of this unit.

.

  Service Manual (available on request)

This manual describes the information for periodic maintenance and detailed ser-
vice.

Trademarks

Trademarks and registered trademarks used in this manual are follows.

.

 Windows, Windows XP, and Windows Vista are registered trademarks of Micro-

soft Corporation in the United States and other countries.

.

 Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries 

in the United States and other countries.

.

 Ethernet is a registered trademark of Xerox Corporation.

Other system names, product names, and company names appearing in this manual 
are trademarks or registered trademarks of their respective holders.

Содержание SRX-T420













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды