17
The content inside the HDD connected to INGEST
PORT 1/2 will be displayed.
However, folders with the following character strings
(regardless of case) will not appear.
bin, boot, dev, etc, home, initrd, lib, misc, opt, proc,
root, sbin, selinux, srv, tmp, sys, usr, var
4
Select the DCP (
) to ingest, and then tap [Ingest].
Tips
• Select the CPL (
) within DCP and tap [Ingest]
to ingest the selected CPL only as new DCP.
• To refresh the displayed content, tap
.
The selected DCP will be ingested into the server.
Tap [OK] to close the message.
5
To continue ingesting multiple DCPs, repeat step
4
.
The DCP ingest request will be registered as the
following job.
6
After DCP has been ingested, select the following
terminals connected to the HDD, and then tap
[Unmount].
• When connected to INGEST PORT 1 terminal,
select [Ingest_USB_1].
• When connected to INGEST PORT 2 terminal,
select [Ingest_USB_2].
You can now safely remove HDDs.
How to export ingested DCP
1
In the [External Folder] pane, select the export
destination.
2
In the [Local Folder] list, select a DCP to export, and
then tap [Export].
How to confirm progress of ingesting/
exporting DCP
You can tap [Job Status] in the [Library] tab to display the
“Job List” screen and check the progress and status of
ingestion.
The following operations are available for each button in
the [Job List] pane.
[Pause]:
Suspends jobs
[Resume]:
Reopens jobs
[Cancel]:
Cancels jobs in progress.
[Remove]:
Deletes jobs
Tip
If you pause a job and then remove it, the next job will
enter a paused state. Tap [Resume] to resume that job.