background image

Help Guide

Wireless Speaker

SRS-XP700 / SRS-XP500

About the BLUETOOTH wireless technology

The BLUETOOTH wireless technology operates within a range of about 30 m (about 98 ft).

Supported version and profiles of the BLUETOOTH standard

A profile is a set of functions standardized for every characteristic of BLUETOOTH devices. The speaker supports the

following version and profiles of the BLUETOOTH standard.

Supported BLUETOOTH version: BLUETOOTH standard, version 5.0

Supported BLUETOOTH profiles:

A2DP (Advanced Audio Distribution Profile): Enables transmission and reception of high-quality music contents.

AVRCP (Audio Video Remote Control Profile): Enables volume adjustment and operations to play/pause music and

skip to the beginning of the next/current track.

Maximum communication range

Use the BLUETOOTH wireless technology between the speaker and a device that are located within 30 m (about 98 ft)

from each other.

Maximum communication range may shorten under the following conditions.

There is an obstacle such as a person, metal, or wall between the speaker and BLUETOOTH device.

A wireless LAN device is in use near the speaker.

A microwave oven is in use near the speaker.

A device that generates electromagnetic radiation is in use near the speaker.

Interference from other devices

Because BLUETOOTH devices and wireless LAN (IEEE802.11b/g) use the same frequency (2.4 GHz), microwave

interference may occur and result in communication speed deterioration, noise, or invalid connection if the speaker is

used near a wireless LAN device.

Interference to other devices

Microwaves emitted from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off the

speaker and other BLUETOOTH devices in the following locations, as it may cause an accident.

Where inflammable gas is present, in a hospital, train, airplane, or a gas station

Near automatic doors or a fire alarm

Note

To be able to use the BLUETOOTH function, the BLUETOOTH device to be connected requires the same profile as the

speaker’s. Note also that even if the same profile exists, devices may vary in function depending on their specifications.

Due to the characteristic of BLUETOOTH wireless technology, the sound played on the speaker is slightly delayed from the

sound played on the BLUETOOTH device while listening to music.

The speaker supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the

BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when

communicating using BLUETOOTH wireless technology.

We do not take any responsibility for the leakage of information during BLUETOOTH communication.

A device featuring the BLUETOOTH function is required to conform to the BLUETOOTH standard specified by Bluetooth SIG,

Inc. and be authenticated. Even if the connected device conforms to the above mentioned BLUETOOTH standard, some devices

may not be connected or work correctly, depending on the features or specifications of the device.

81

Содержание SRS-XP500





































































































Отзывы: