Wireless Speaker
SRS-XB402M
Connecting the speaker to an AC outlet
This speaker can run on power either from the AC outlet to which it is connected by the supplied AC adaptor or from the
built-in battery.
When using the speaker for the first time, be sure to charge the built-in battery for more than 1 hour before turning on the
power.
You can operate the speaker with the built-in battery by charging the speaker before use.
Note
Depending on your countries/regions, the shape of the AC adaptor may be different from the one illustrated below.
Checking the built-in battery level of the rechargeable built-in battery
After pressing and holding the LIGHT button/
BATTERY button, when the speaker is turned on, the voice guidance
listed below is output from the speaker depending on the remaining built-in battery power.
The voice guidance is available in English only.
80% or more: “Battery fully charged.”
60% or more: “Battery about 80%.”
40% or more: “Battery about 60%.”
Connect the AC adaptor to the DC IN 5V jack on the speaker, and then plug the AC adaptor into an AC
outlet.
The speaker turns on automatically.
The CHARGE indicator lights up in orange while charging. Charging is completed in about 6 hours
*
and the
indicator turns off.
If the built-in battery is fully charged when you connect the speaker to an AC outlet, the CHARGE indicator lights up
in orange then turns off after about 1 minute.
Hint
While you listen to music through the speaker, the speaker is capable of charging the built-in battery as long as it is
connected to an AC outlet by the suppled AC adaptor. However, it may take longer to charge the battery depending on the
conditions of use. When you charge the battery, it is recommended that you turn off the power to the speaker.
1
Time that is required to charge the empty built-in battery to its full capacity when the speaker turns off.
*
9
