Personal Audio System
SRS-X3
Receiving a call
You can enjoy a hands-free call with a BLUETOOTH mobile phone that supports the BLUETOOTH profile HFP (Hands-
free Profile) or HSP (Headset Profile), via a BLUETOOTH connection.
If your BLUETOOTH mobile phone supports both HFP and HSP, set it to HFP.
Operations may vary depending on the BLUETOOTH mobile phone. Refer to the operating instructions supplied with
your mobile phone.
About ring tone
When an incoming call arrives, a ring tone will be heard via the speaker.
The ring tone varies in the following ways, depending on your BLUETOOTH mobile phone.
Ring tone set on the speaker
Ring tone set on the BLUETOOTH mobile phone
Ring tone set on the BLUETOOTH mobile phone only for a BLUETOOTH connection
1. Connect the speaker with a BLUETOOTH mobile phone.
The (BLUETOOTH) indicator lights up in white when the BLUETOOTH connection is established.
2. Press the
(call) button when a call is received.
Talk into the microphone of the speaker.
When an incoming call arrives, playback pauses and a ring tone is heard from the speaker.
If no ring tone is heard via the speaker
The speaker may not connect with a BLUETOOTH mobile phone with HFP or HSP. Check the connection status
on the BLUETOOTH mobile phone.
Switch the call device to the speaker by pressing and holding the
(call) button for about 2 seconds.
3. Press the VOL (volume) -/+ buttons to adjust the volume.
When you press the VOL (volume) -/+ buttons, the
(power) indicator flashes once in green.
When you press the VOL (volume) –/+ buttons at the lowest or highest level, the
(power) indicator flashes
Help Guide
How to Use
66
