Command List
Timing chart
Command seq=100
Command seq=100
Acknowledge seq=100
Completion seq=100
Time out
Controller
Peripheral device
Timing chart (loss of command)
ERROR
(abnormality in the sequence n
umber)
seq=100
Acknowledge seq=100
Completion seq=100
Command seq=100
Command seq=100
Command seq=101
Acknowledge seq=101
Completion seq=101
Time out
Controller
Peripheral device
Timing chart (loss of Acknowledge or completion message)
IP Related Setting
Command
The following commands are provided for setting the
IP address and name of this unit.
No.
Name
Description
1
Setting Protocol:
Inquiry
The controller inquires the
network setting for the camera.
2
Setting Protocol:
Inquiry reply
The camera replies according to
the inquiry from the controller.
3
Setting Protocol:
Network setting
The controller sets the network
setting of the camera.
4
Setting Protocol:
Network setting reply
The camera replies according to
the network setting of the
controller.
The network setting of the IP card is performed as
communication sequence in the following.
1 Inquiry
The controller sends the inquiry packet to the
broadcast address (255.255.255.255), specified port
number (52380) of UDP. The IP card replies as the
inquiry reply packet.
2 Network setting
The controller sends the network setting packet to the
broadcast address (255.255.255.255), specified port
number (52380) of UDP. The receiving side sees the
MAC address unit in the packet, and returns
Acknowledge as the network setting reply if it is the
request for the receiving side.
