Sony SPP-N1025 - Cordless Telephone Скачать руководство пользователя

Страница: 54 / 60

Additional Information

Remedy

• Make sure you set up the base phone correctly

(page 6).

• Move the handset closer to the base phone.

• Make sure the telephone line cord is securely

connected to the telephone outlet.

• Make sure the battery is fully charged (page 9).

• Make sure the dialing mode is set correctly (page 12).
• Before dialing, make sure you hear a dial tone.

• Make sure the last dialed number is really the one you

want to dial.

• The number you last dialed exceeds 32 digits

(including the tone and pause digits if used).

• The number you last dialed is erased.

• Make sure the last dialed number is really the one you

want to dial.
The number you last dialed exceeds 16 digits.

• Move the handset closer to the base phone and

perform the redial operations again.

• Make sure the ringer is turned on.
• The battery may be weak. Charge the battery for

more than 12 hours (page 9).

• Make sure you set up the base phone correctly

(page 6).

• Move the handset closer to the base phone.

• Make sure the telephone line cord is securely

connected to the telephone outlet.

Troubleshooting

If you’ve experienced any of the following difficulties while using your
phone, use this troubleshooting to help you remedy the problem.
Should any problem persist, consult your nearest Sony dealer.

Symptom

You hear five short error
beeps when you press

(TALK)

You hear no dial tone.

The phone does not connect at
all, even though the number
you dial is correct.

The phone does not redial
correctly.

You hear five short error beeps
when you try to redial on the
handset.

The base phone does not redial
correctly.

You cannot perform the redial
operations (redialing, checking
and erasing the phone
number), and “NO
CONNECT” appears on the
display.

The handset does not ring.

“NO LINE” appears on the
display.

Making calls

Receiving calls

Содержание SPP-N1025 - Cordless Telephone





























































Результаты поиска

Содержание SPP-N1025 - Cordless Telephone

Отзывы:

Похожие инструкции для SPP-N1025 - Cordless Telephone

Бренды по названию

Популярные бренды

Sony SPP-N1025 - Cordless Telephone, Руководство по эксплуатации

Результаты поиска

Содержание SPP-N1025 - Cordless Telephone

Отзывы:

Похожие инструкции для SPP-N1025 - Cordless Telephone

Бренды по названию

Популярные бренды