Sony SPP-A974, Руководство по эксплуатации

Страница: 14 / 112

Getting Started
14 US
Notes
• If the local area code is already entered, it appears on the display in step 5. To
enter a different local area code, see “To change the local area code” below.
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• You may press Jog Dial instead of
(PGM)
in step 7.
• To check the current local area code, perform steps 1 to 5. The local area code
appears on the display for about 20 seconds.
To change the local area code
1
Perform steps 1 to 5 on page 13.
The current local area code appears on the display.
2
Turn Jog Dial down to erase the current local area code.
3
Enter a new local area code using the dialing keys.
4
Press (PGM) .
You will hear a long confirmation beep.
To erase the local area code
You can erase the local area code. Perform steps 1 and 2 above, then
press
(PGM)
.
The local area code will be erased, and you hear a long confirmation
beep.
Step 4: Entering the area code (continued)
5
Press Jog Dial.
“ENTER AREA CODE” appears on the display.
6
Enter three digits of the local area code using the dialing
keys.
7
Press (PGM) .
You will hear a long confirmation beep.